Buying or owning a home in Northeast Florida comes with a lot of excitement. From enjoying coastal breezes to settling into established neighborhoods, there is plenty to love. However, if your home was built between 1965 and 1973, you may face a hidden safety concern. Having aluminum wiring in house systems during this era was common across Jacksonville, Orange Park, and surrounding areas.
While aluminum carries electricity just like copper, single-strand aluminum wiring creates distinct safety hazards over time. As this wiring ages, it increases the risk of electrical fires and creates challenges for home insurance. Understanding how single-strand aluminum wiring works, why it causes problems, and what steps you can take will help keep your Northeast Florida home safe and insurable.
What Is Single-Strand Aluminum Wiring?
Single-strand aluminum wiring is a type of branch circuit wiring used in residential homes during the mid-1960s to the early 1970s. Builders used it as a low-cost alternative to copper during a time when copper prices soared. Branch circuits feed electricity directly to standard wall outlets, light switches, and light fixtures.
In Jacksonville neighborhoods established during that building boom, such as Arlington, San Marco, and parts of Westside, thousands of homes were wired using single-strand aluminum. While the metal conducts electricity well enough, it reacts very differently to heat and pressure compared to copper.
It is important to note that multi-strand aluminum wiring is still used safely today for main power feed lines and heavy appliance circuits. The primary safety concern centers entirely on single-strand branch wiring connected to everyday switches and outlets.
Why Having Single-Strand Aluminum Wiring in House Systems Creates Safety Risks
Single-strand aluminum wiring causes safety problems because of how the metal behaves inside electrical boxes over time. Unlike copper, aluminum expands and contracts rapidly when electric current flows through it.
Here are the main reasons why single-strand aluminum wiring creates hazards in homes:
High Thermal Expansion: Aluminum expands much more than copper when heated. Every time you turn on a light or plug in a vacuum, the wire warms up and expands. When turned off, it cools down and shrinks. This constant movement causes connections at switch terminals and outlet screws to loosen over time.
Oxidation and Rust: When aluminum meets oxygen, it forms aluminum oxide. Unlike copper oxide, which still conducts electricity, aluminum oxide acts as an insulator. This buildup creates electrical resistance, which generates excess heat inside wall boxes.
Metal Creep: Aluminum is a softer metal than copper. Under the constant pressure of a screw terminal inside an outlet, the wire gradually reshapes and flattens out. This process, known as creep, leads to loose electrical connections.
Electrical Arcing: Loose wires combined with high resistance cause electricity to jump across gaps. This jump is called an arc. Arcing creates extreme temperatures that easily melt plastic outlets, ignite wall insulation, or cause hidden fires behind drywall.
Over time, these combined issues turn simple everyday electrical use into a serious fire hazard hidden behind your walls.
How Aluminum Wiring Compares to Copper Wiring
To see why single-strand aluminum needs extra attention, it helps to compare its physical traits directly with copper wiring.
Up to 55 times more likely to reach fire conditions
Insurance Status
Accepted by all insurance carriers
Requires special inspections or approved repairs
These stark differences explain why insurance companies treat single-strand aluminum as a high safety risk and why proper evaluation is essential for your home.
Signs You May Have Aluminum Wiring in House Installations
You cannot always see the wires behind your walls, but several signs suggest your home might have single-strand aluminum wiring.
First, check the age of your house. If your Jacksonville home was constructed between 1965 and 1973, there is a strong chance aluminum branch wiring was used. Second, check for these warning signs around your home:
Wall switch plates or outlet covers that feel warm or hot to the touch.
A strange burning plastic smell near light switches or wall plugs.
Lights that flicker or dim randomly when small appliances turn on.
Outlets or switches that stop working for no obvious reason.
A soft buzzing or sizzle sound coming from inside switch boxes.
Static or interference on audio equipment and televisions.
If you open your main electrical panel or look at exposed wiring in the attic, you may see stamped markings on the plastic wire jacket. Look for letters such as AL, ALUM, or ALUMINUM stamped every few feet along the outer sheath.
Florida Home Insurance Challenges with Aluminum Wiring
Securing home insurance in Florida requires extra effort, and having aluminum wiring in house circuits makes it even more challenging. Insurance companies across Duval County, St. Johns County, and Clay County closely review electrical systems before issuing policies.
Most Florida home insurance carriers require a specialized 4-Point Inspection for homes older than 20 years. During this 4-Point inspection, the inspector examines four critical systems: the roof, plumbing, HVAC, and electrical wiring.
If single-strand aluminum wiring is present, many insurance carriers will refuse coverage until the system is evaluated by a licensed professional or repaired using approved remediation methods. Insurance companies view uncorrected aluminum wiring as a high risk for electrical fires. Leaving it unaddressed can result in policy denial, non-renewal, or significantly higher premium rates.
How Home Inspectors Find Aluminum Wiring Risks
A standard visual home inspection offers a great start, but thorough property inspectors use advanced technology to spot hidden electrical hazards without damaging your walls.
During a professional inspection, your inspector will remove panel covers, inspect branch wiring connections, and look for signs of overheating. They will also verify whether any past repairs were done using proper, safety-tested methods or dangerous DIY fixes.
Using a Thermography Inspection (thermal imaging) adds an extra layer of protection. Infrared cameras detect hidden temperature differences behind walls, inside switch boxes, and across breaker panels. Because loose aluminum connections generate heat long before they smoke or spark, thermal imaging spots hot spots invisible to the human eye. This gives you clear answers about your electrical safety before a small issue turns into a real emergency.
Safe Fixes for Aluminum Wiring in House Systems
If your home has aluminum branch wiring, you do not always need to tear down your drywall to replace every single line. Modern engineering provides safe, approved solutions that bring your home up to safety standards without a total teardown.
Here are the primary ways to address single-strand aluminum wiring safely:
1. Complete Home Rewiring
Replacing all single-strand aluminum branch wiring with modern copper wire is the permanent solution. While this is the most costly and invasive option, it eliminates the risk and provides total peace of mind. It also makes getting home insurance fast and straightforward.
2. COPALUM Crimp Connectors
The COPALUM connector method uses a special crimping tool to attach a short piece of copper wire (a pigtail) to the end of the aluminum wire. The copper tail then connects safely to standard wall outlets and switches. This system creates a cold-weld connection that prevents oxidation and loosening. It requires an electrician certified specifically for this specialized system.
3. AlumiConn Connectors
AlumiConn lug connectors offer another widely approved method for pigtailing. Each wire enters its own separate port with a mechanical screw coated in a special antioxidant gel. This prevents the aluminum and copper wires from touching directly, stopping galvanic corrosion and keeping connections secure.
4. CO/ALR Devices
In smaller projects, replacing outlets and switches with devices specifically labeled CO/ALR (meaning Copper/Aluminum Revised) helps improve safety. These devices use materials designed to expand and contract at rates similar to aluminum. However, this is usually considered a temporary fix rather than a full system remediation for insurance purposes.
Warning: Never use standard twist-on wire nuts (even wire nuts filled with antioxidant grease) to connect aluminum wire directly to copper wire. Standard wire connectors loosen quickly and represent a major fire hazard.
Related Questions to Explore
What other electrical and structural issues do insurance companies look for during an inspection?
Beyond wiring, insurance providers often require a 4-point inspection to evaluate the age and condition of the roof, heating and cooling system, and plumbing lines. Outdated electrical panels, polybutylene pipes, or older roofs can trigger similar insurance hurdles.
How can inspectors detect hidden home defects without tearing open walls?
Thermal imaging inspections use infrared technology to detect subtle temperature changes behind walls and ceilings. This non-invasive tool helps spot missing insulation, hidden plumbing leaks, moisture intrusion, and dangerous electrical hot spots early.
What additional specialized inspections should home buyers consider in Northeast Florida?
Standard home inspections cover major structural and mechanical systems, but specialized checks offer deeper protection. Adding sewer scope inspections checks main drain lines for blockages, while mold inspections and wind mitigation assessments help identify hidden environmental hazards and qualify buyers for insurance discounts.
How does moisture impact older homes in Jacksonville?
Coastal humidity and heavy rainfall can degrade exterior cladding over time. Professional stucco inspections and moisture testing help detect trapped water behind walls that leads to wood rot, structural framing damage, or poor indoor air quality.
When to Call a Professional
Dealing with electrical safety is never a DIY job. If you live in or are planning to purchase an older home in Jacksonville, St. Augustine, or surrounding Northeast Florida communities, scheduling a professional inspection is the safest first step.
You should contact a professional property inspector if:
You are buying or selling a home built between 1965 and 1973.
Your home insurance company is requesting a 4-Point Inspection or an electrical certification.
You notice warm switch plates, flickering lights, or burning plastic odors near outlets.
You want to evaluate previous electrical work to ensure it meets modern safety standards.
Professional inspectors deliver clear, detailed reports that give you the exact information you need to make smart home repairs and protect your property investment.
Ensuring Electrical Safety in Your Northeast Florida Home
Understanding the risks associated with single-strand aluminum wiring in house setups gives you the power to take smart, proactive steps. While uncorrected aluminum wiring presents real fire hazards and insurance challenges, modern remediation techniques make these systems safe and insurable once again.
If you are buying a home, preparing for an insurance review, or simply looking for peace of mind in your current house, expert guidance makes all the difference. Contact Inside & Out Property Inspectors INC. today to schedule a detailed home inspection, 4-Point inspection, or thermal imaging assessment across Northeast Florida. Our team helps you spot hidden issues early so you can keep your home safe, comfortable, and fully protected.
https://insideandoutpropertyinspectors.com/wp-content/uploads/2026/09/Jacksonville-Guide-to-Aluminum-Wiring-in-House-Risks.jpg10001500BJ Johnsonhttps://d39oyu4lp7snwz.cloudfront.net/wp-content/uploads/sites/54/2019/08/31171419/io-favicon-300x300.pngBJ Johnson2026-09-02 13:26:352026-09-02 13:26:35Jacksonville Guide to Aluminum Wiring in House Risks
A power surge can last less than a millisecond, but the damage it leaves behind can cost hundreds, sometimes thousands of dollars. If you’ve had an appliance die without explanation, noticed flickering lights during a storm, or come home to tripped breakers after a Florida afternoon thunderstorm, you’ve likely experienced one.
For homeowners in Jacksonville, St. Augustine, and across Northeast Florida, power surges aren’t a rare event. Florida leads the nation in lightning strikes, and the combination of aging electrical systems and the demands of year-round air conditioning creates conditions where surges are a genuine, ongoing risk. Understanding what causes power surges, what they damage, and what a home inspector actually evaluates helps you protect your home and make smarter decisions when buying or selling.
What Is a Power Surge?
A power surge is a sudden jump in electrical voltage that briefly exceeds what your home’s wiring and connected electrical devices are designed to handle.
Power surges are caused by sudden increases in voltage, often exceeding 169 volts in standard 120-volt systems. That excess voltage can destroy the sensitive electronics inside appliances, HVAC systems, and smart home devices in an instant.
What many homeowners don’t realize is that power surges can occur frequently. Low-level surges happen dozens or even hundreds of times each day, often without any visible signs of damage. Over time, this creates what some electricians call “electronic rust,” which is the gradual degradation of internal circuitry that shortens the lifespan of connected electrical devices well before their time.
What Causes Power Surges: Internal vs. External
Power surges fall into two broad categories, and knowing the difference matters for how you protect against them.
Roughly 60 to 80 percent of power surges are caused by internal activities within the home, meaning the biggest threat is often already inside your walls.
Internal Power Surges
Internal surges are the most common cause of day-to-day power surge damage. More than half of household power surges are internal, caused by devices with motors starting up or shutting off, which momentarily diverts electricity to and from other appliances on the same circuit.
Large appliances cycling on and off are the primary culprit. High-energy devices like air conditioners, refrigerators, and washing machines cause internal surges due to their large power demands when their motors start. In Florida, where AC units run nearly year-round, these micro-surges happen constantly and gradually wreak havoc on sensitive electronics throughout the home.
Overloaded circuits occur when too much power is drawn from a single circuit, often from overusing extension cords or plugging too many devices into the same circuit. A basic power strip without surge protection offers no defense against this. Circuit breakers frequently tripping on the same circuit is a clear signal that the circuit is being asked to do more than it was designed for.
Faulty or outdated wiring is a significant internal cause of power surges. Damaged or exposed electrical wires lead to erratic currents and voltage spikes. Outdated wiring cannot manage modern electrical loads effectively.
In older Jacksonville neighborhoods, parts of Orange Park, and the historic areas of St. Augustine, inadequate wiring is more common than many buyers expect. This is also a fire risk, not just a surge risk.
External Power Surges
External power surges are commonly caused by lightning strikes, tree limbs touching power lines, vehicle accidents involving utility poles, or utility equipment failures, all of which can send excess voltage directly into your home.
Lightning strikes are the most destructive. Florida is the lightning capital of the United States, and a direct strike on or near your home can send an overwhelming amount of voltage through power lines into your electrical system instantly. Even a strike that hits a power line several blocks away can travel through the grid and into connected electrical devices immediately.
Power outages and restoration are a lesser-known external cause. Power surges can also occur when electricity is restored after a power outage, as the sudden influx of electrical current creates a voltage spike that can damage plugged-in devices. This is especially relevant in NE Florida during hurricane season, when outages and restorations happen repeatedly in short windows.
Electric utility switching is another source that many homeowners never consider. Power companies’ switching processes to balance demand can cause brief voltage transients that travel into homes on the affected circuit.
What Power Surges Can Damage
Devices containing microprocessors, such as TVs, computers, microwaves, and smart home equipment, are particularly vulnerable, as even a 10-volt fluctuation can disrupt their functioning. In a modern home, it includes nearly every major device.
Some surge damage is instantaneous; a device simply will not turn on after a significant power surge. Other damage accumulates invisibly, with electronic equipment becoming unreliable or failing years before expected.
How to Protect Your Home From Power Surges
A layered approach offers the best protection against both internal and external surges:
A whole-house surge protector installed at the electrical panel by a certified electrician is the most effective defense against external power surges from lightning and utility events. Whole-house surge protector units are generally a worthwhile investment, especially in areas with a high number of lightning strikes, which describes most of Northeast Florida. It intercepts large voltage spikes before they reach your connected electrical devices.
Point-of-use surge protective devices provide a critical secondary layer. Surge protectors at the outlet level, especially combined with a reliable grounding system, protect electrical devices from all but the most severe power surges. Look for a listed joule rating; a basic power strip without one offers no surge protection at all.
Proper grounding is essential. A properly grounded electrical system gives excess voltage a safe path out of the home. Improper grounding is both a surge risk and a safety hazard.
Unplug during storms because no surge protector guarantees full protection from a direct lightning strike. Unplugging sensitive electronics and computer equipment during severe weather remains the most reliable precaution.
What a Home Inspector Looks For
Home inspectors are not electricians. They do not open walls, probe wiring behind surfaces, or perform electrical diagnostic testing. What they do is conduct a thorough visual assessment of accessible components of the electrical system.
During a home inspection, the electrical evaluation includes:
The electrical panel’s condition, brand, and signs of double-tapping or improper wiring
Visible wiring in accessible areas, including the attic, crawlspace, and garage
Evidence of overusing extension cords or DIY electrical work
Presence or absence of whole-house surge protection
For Florida homes, the panel brand matters significantly. Federal Pacific and Zinsco panels are well-documented safety concerns and are frequently flagged by insurers as non-insurable. If you suspect faulty wiring or have concerns about your electric system, a home inspection is the right starting point, but a certified electrician is the appropriate next step for diagnosis and repair.
Power Surges and Florida Home Insurance
Florida insurers take electrical systems seriously. A 4-point inspection covering the electrical system, HVAC, plumbing, and roof is frequently required for older homes before a homeowner’s insurance policy can be issued or renewed. The electrical component looks specifically at panel type, wiring material, and overall condition.
Combining a full home inspection with a 4-point inspection when purchasing an older home in Jacksonville or St. Augustine gives you the most complete picture of the electrical system before closing.
Questions Homeowners Ask About Power Surges
Are internal surges really a bigger risk than lightning? For most homes, yes. While lightning damage is dramatic, internal power surges caused by large appliances like air conditioners cycling on and off cause far more cumulative damage over time. A whole-house protector addresses external surges, but point-of-use surge protective devices protect sensitive electronics from internal surges on the same circuit.
Does a home inspection catch surge-related electrical problems? A home inspection identifies visible issues that contribute to surge risk, such as outdated wiring, overloaded circuits, an inadequate or flagged electrical panel, and the absence of surge protection. It is a visual assessment, not a full electrical diagnostic. If issues are flagged, a certified electrician should evaluate further before you close.
Can a power surge cause a house fire? Yes, in some cases. A large power surge through faulty wiring or damaged exposed electrical wires can generate enough heat to ignite surrounding materials. This is why surge events in older homes should never be ignored, especially when accompanied by a burning smell or buzzing sound coming from the panel or walls.
What’s the difference between a surge and a power outage? A power outage is a complete loss of electrical power. A power surge is the opposite: a sudden jump in electrical voltage above normal levels. Both can damage devices, but surges cause more immediate hardware damage because of the excess voltage spike itself. During a pre-drywall inspection, we verify that your electrical panel is correctly grounded.
When to Call a Professional
If you are buying a home or have just moved in, look into a warranty inspection or home inspection with Inside & Out Property Inspectors. If any of the following are present in your home, contact a certified electrician:
Flickering lights or a buzzing sound with no clear cause
Circuit breakers frequently trip on the same circuit
A burning smell coming from outlets, the panel, or inside the walls
Exposed electrical wires or outlets that feel warm to the touch
Scorch marks or discoloration near any outlet or switch
Conclusion
For buyers and sellers across Jacksonville, St. Augustine, Nocatee, Ponte Vedra Beach, Fleming Island, Orange Park, and throughout Northeast Florida, Inside and Out Property Inspectors provides thorough home inspections covering the full electrical system.
We also offer 4-point inspections for insurance purposes, wind mitigation inspections, and a full range of specialty services to give you a complete picture of any property.
We’re inspectors, not electricians, and we’ll always be upfront about what a visual inspection can and cannot tell you. But knowing what to look for, what questions to ask, and when to bring in a specialist is exactly what a good inspection equips you to do.
A flickering light bulb is relatively common and might seem like a harmless quirk – but have you ever wondered if it’s signaling a dangerous underlying problem? In some cases, ignoring this issue could lead to potential safety hazards or even expensive electrical repairs.
So you’re always prepared for this situation moving forward, this post will explain common causes behind flickering light bulbs and explore the potential dangers. We’ll also cover practical troubleshooting tips to help you address the flickering and know when it’s time to call an expert.
What Causes Light Bulbs to Flicker?
Several factors can cause a light bulb to flicker, ranging from minor issues to serious concerns:
Loose light bulb connections: This prevents a steady flow of electricity to the bulb.
Faulty light switches: They can intermittently cut power, causing flickering.
Voltage fluctuations: Inconsistent voltage in your home’s electrical system may cause lights to flicker, especially with outdated wiring that can’t handle modern electrical demands.
Outdated wiring: Old wiring may not be able to support the power needs of modern appliances and electronics, leading to flickering.
Overloaded circuits: When circuits are strained to provide power consistently, lights may flicker.
Risks of Flickering Light Bulbs
While a flickering light bulb seems like a minor inconvenience, it can indicate bigger problems that pose bigger risks. Ignoring the flickering could lead to:
Fire hazards: Loose connections or faulty wiring can generate heat and sparks, increasing the risk of electrical fires.
Electrical shock risks: The underlying issue causing the flickering may expose you to live wires, posing a shock hazard.
Damage to appliances and electronics: Inconsistent power from flickering can harm sensitive electronic components.
Reduced light bulb lifespan: Constant flickering can cause light bulbs to burn out more quickly, which means more frequent replacements.
Troubleshooting for Flickering Lights
If you notice a flickering light bulb, consider trying these simple troubleshooting:
Tighten loose connections: Gently tighten the light bulb and check the fixture’s connections to ensure a steady power flow.
Replace old switches: Faulty or worn-out light switches can cause intermittent flickering, so try replacing them with new ones.
Upgrade to compatible bulbs: Use high-quality light bulbs designed for your specific fixture to minimize flickering and ensure optimal performance.
Redistribute electrical loads: If multiple lights are flickering, try redistributing electrical loads evenly across circuits to prevent overloading.
Other Recommended Maintenance
To prevent flickering light bulbs and ensure electrical safety, consider a few key maintenance tasks. Regularly inspect your home’s wiring for signs of wear, damage, or outdated components that may need to be replaced to prevent flickering and other electrical issues.
If your home has an outdated electrical panel, upgrading to a modern one can help accommodate your current power needs and reduce the risk of flickering. Additionally, installing surge protectors throughout the home can safeguard your valuable electronics from potential damage caused by flickering or power surges.
When to Call a Professional
If you experience persistent flickering despite your efforts, there may be a more serious underlying issue.
Also, if you notice visible sparks or burning odors coming from outlets, switches, or fixtures, turn off the power immediately. Then, get help from an expert. Frequent circuit breaker trips or blown fuses could also indicate a severe electrical problem that needs professional assessment.
In any of these cases, it’s essential to have a licensed electrician address the issue. Attempting to diagnose and fix these serious issues yourself can be dangerous.
Conclusion
To summarize, don’t ignore that flickering light bulb – while it’s not always dangerous, it could be a warning sign of a serious electrical issue. It can be tempting to brush off the annoyance, but addressing it quickly is the best course of action.
You are watching a great show on TV and then all of a sudden, the power goes out. Shortly after, it comes back on. What was that? It was probably a power surge. What is a power surge? It is when the flow of electricity is interrupted and then it starts again. These can be minor or there can be damage. We will take a look at why you need to know about power surges, types of power surges, prevention, surge protectors, results, signs of a power surge, and other areas to check.
Why You Need to Know About Power Surges
Power surges occur with things in the home that have microprocessors. Examples are TVs, computers, and microwaves. Furthermore, larger machinery like dishwashers, refrigerators, and washing machines can have power surges. Depending on the type of power surge, there can be damage. Most homes have appliances or devices that can handle from 0 to 169 volts. However, a power surge can exceed 169 volts and then cause damage.
Types of Power Surges
There are two types of power surges: internal and external
Internal Power Surge
These happen many times a day and make up more than half of all power surges. They usually happen because of motors turning on and off and the electricity goes to the other appliances in the home. Refrigerators and air conditioners do this the most, but hair dryers and power tools do as well.
External Power Surge
Comes from outside and home and is due to lightning strikes, a small animal making its way into a transformer (think of squirrels near the transformers), and also a tree branch landing on a power line.
Lower level surges of the types listed above can cause “electronic rust.”
Prevention of a Power Surge
External surges can’t be prevented as many of them have to do with mother nature and wild animals. However, there are things we can do to prevent Internal surges.
Unplug devices in the home that are not in use – this cuts back on the electricity flowing through the home. Daily, unplugging the toaster over is a good idea when everyone is done using it. Look around the home for other things plugged in that no one is using.
Upgrade wiring – if you have a home with wiring from before the 1980s, it may need upgrading. This is especially true if you have blown fuses, circuit breakers that trip or are bad, or lights that flicker on and off. You might even have aluminum wiring in the home. aluminum wiring risks is some information on what to look for.
Overloaded circuits – if you have a newer home, it is possible that you have circuits that are overloading. You might have large appliances that pull power from the same place and need to have it divided up. You may need to have a professional add another circuit for you. Look in your family room and see if there are a lot of computers, entertainment devices all plugged in the same place. This can also cause a surge.
Surge Protector – a quality surge protector will help protect the home from damage. It will also take the electricity and divert it to the ground instead of through the appliances. There are different types that we will take a look at.
Here is a video about power surges in one Austin, TX neighborhood
Types of Surge Protectors
Surge protectors are also known as surge suppressors or surge diverters. Let’s take a look at a few types so you know what will work best in your home.
Whole house or panel mounted– these prevent power surges from entering the home and go to the fuse box. They range from $50 and up.
Power strips with surge protection- the most affordable way to go. However, not all power strips are created equal, and the most expensive does not mean better. Choose one that will hold the number of joules for the appliances you are protecting.
Transient Voltage Surge Suppressors (TVSS)-hardwired into the outlet boxes in a home and provide excellent protection. They have a light or alarm that indicates there has been a surge and ranges from $25 to $100. Lastly, the price depends on the joules, amps, and alarms on the device.
Results of a Power Surge if You Are Not Careful
If too much electricity is sent through to an appliance, there can be an electrical fire . Not only will you have damage but will also need to deal with smoke damage to the home.
External power surges can cause damage to the HVAC unit. Unfortunately, there is nothing you can do to prevent it. A professional will need to be called to see if it can be fixed or if it is replaceable.
Signs There Has Been a Power Surge
The clock or lights are flashing on an electrical device or appliance
The electrical device or appliance is off or does not work
There is a burnt odor around the device or power source
A surge protector or power strip may require resetting
Check your electrical panel to see if you have recalled Challenger GFCI breakers or an FPE panel. If you do, contact a professional for assistance.
When to Call a Professional
Call a professional if you have any issues after a power surge or if you want to find out why you are having tripping of circuits or lights going out etc. Also, if you have any wiring issues, a professional can help.
https://insideandoutpropertyinspectors.com/wp-content/uploads/2021/05/Power-surge-scaled.jpeg17072560BJ Johnsonhttps://d39oyu4lp7snwz.cloudfront.net/wp-content/uploads/sites/54/2019/08/31171419/io-favicon-300x300.pngBJ Johnson2021-05-08 22:55:552026-08-03 18:35:12Power Surge Types and What Causes Them